nginx-mod-stream - Nginx stream modules<br />

Nginx stream modules.

Change Log:

nginx-mod-mail - Nginx mail modules<br />

Nginx mail modules.

Change Log:

nginx-mod-http-xslt-filter - Nginx XSLT module<br />

Nginx XSLT module.

Change Log:

nginx-mod-http-perl - Nginx HTTP perl module<br />

Nginx HTTP perl module.

Change Log:

nginx-mod-http-image-filter - Nginx HTTP image filter module<br />

Nginx HTTP image filter module.

Change Log:

nginx-core - nginx minimal core<br />

nginx minimal core

Change Log:

nginx - A high performance web server and reverse proxy server<br />

Nginx is a web server and a reverse proxy server for HTTP, SMTP, POP3 and<br /> IMAP protocols, with a strong focus on high concurrency, performance and low<br /> memory usage.

Change Log:

nginx-filesystem - The basic directory layout for the Nginx server<br />

The nginx-filesystem package contains the basic directory layout<br /> for the Nginx server including the correct permissions for the<br /> directories.

Change Log:

nginx-all-modules - A meta package that installs all available Nginx modules<br />

Meta package that installs all available nginx modules.

Change Log:

scap-security-guide-doc - HTML formatted security guides generated from XCCDF benchmarks<br />

The scap-security-guide-doc package contains HTML formatted documents containing<br /> hardening guidances that have been generated from XCCDF benchmarks<br /> present in scap-security-guide package.

Change Log:

scap-security-guide - Security guidance and baselines in SCAP formats<br />

The scap-security-guide project provides a guide for configuration of the<br /> system from the final system's security point of view. The guidance is specified<br /> in the Security Content Automation Protocol (SCAP) format and constitutes<br /> a catalog of practical hardening advice, linked to government requirements<br /> where applicable. The project bridges the gap between generalized policy<br /> requirements and specific implementation guidelines. The system<br /> administrator can use the oscap CLI tool from openscap-scanner package, or the<br /> scap-workbench GUI tool from scap-workbench package to verify that the system<br /> conforms to provided guideline. Refer to scap-security-guide(8) manual page for<br /> further information.

Change Log:

kernel-doc - Various documentation bits found in the kernel source<br />

This package contains documentation files from the kernel<br /> source. Various bits of information about the Linux kernel and the<br /> device drivers shipped with it are documented in these files.<br /> <br /> You'll want to install this package if you need a reference to the<br /> options that can be passed to Linux kernel modules at load time.

Change Log:

vim-enhanced - A version of the VIM editor which includes recent enhancements<br />

VIM (VIsual editor iMproved) is an updated and improved version of the<br /> vi editor. Vi was the first real screen-based editor for UNIX, and is<br /> still very popular. VIM improves on vi by adding new features:<br /> multiple windows, multi-level undo, block highlighting and more. The<br /> vim-enhanced package contains a version of VIM with extra, recently<br /> introduced features like Python and Perl interpreters.<br /> <br /> Install the vim-enhanced package if you'd like to use a version of the<br /> VIM editor which includes recently added enhancements like<br /> interpreters for the Python and Perl scripting languages. You'll also<br /> need to install the vim-common package.

Change Log:

vim-common - The common files needed by any version of the VIM editor<br />

VIM (VIsual editor iMproved) is an updated and improved version of the<br /> vi editor. Vi was the first real screen-based editor for UNIX, and is<br /> still very popular. VIM improves on vi by adding new features:<br /> multiple windows, multi-level undo, block highlighting and more. The<br /> vim-common package contains files which every VIM binary will need in<br /> order to run.<br /> <br /> If you are installing vim-enhanced or vim-X11, you'll also need<br /> to install the vim-common package.

Change Log:

vim-X11 - The VIM version of the vi editor for the X Window System - GVim<br />

VIM (VIsual editor iMproved) is an updated and improved version of the<br /> vi editor. Vi was the first real screen-based editor for UNIX, and is<br /> still very popular. VIM improves on vi by adding new features:<br /> multiple windows, multi-level undo, block highlighting and<br /> more. VIM-X11 is a version of the VIM editor which will run within the<br /> X Window System. If you install this package, you can run VIM as an X<br /> application with a full GUI interface and mouse support by command gvim.<br /> <br /> Install the vim-X11 package if you'd like to try out a version of vi<br /> with graphics and mouse capabilities. You'll also need to install the<br /> vim-common package.

Change Log:

libwinpr - Windows Portable Runtime<br />

WinPR provides API compatibility for applications targeting non-Windows<br /> environments. When on Windows, the original native API is being used instead of<br /> the equivalent WinPR implementation, without having to modify the code using it.

Change Log:

freerdp-libs - Core libraries implementing the RDP protocol<br />

libfreerdp-core can be embedded in applications.<br /> <br /> libfreerdp-channels and libfreerdp-kbd might be convenient to use in X<br /> applications together with libfreerdp-core.<br /> <br /> libfreerdp-core can be extended with plugins handling RDP channels.

Change Log:

freerdp - Free implementation of the Remote Desktop Protocol (RDP)<br />

The xfreerdp & wlfreerdp Remote Desktop Protocol (RDP) clients from the FreeRDP<br /> project.<br /> <br /> xfreerdp & wlfreerdp can connect to RDP servers such as Microsoft Windows<br /> machines, xrdp and VirtualBox.

Change Log:

apr-util-sqlite - APR utility library SQLite DBD driver<br />

This package provides the SQLite driver for the apr-util DBD<br /> (database abstraction) interface.

Change Log:

apr-util-pgsql - APR utility library PostgreSQL DBD driver<br />

This package provides the PostgreSQL driver for the apr-util<br /> DBD (database abstraction) interface.

Change Log:

apr-util-openssl - APR utility library OpenSSL crypto support<br />

This package provides the OpenSSL crypto support for the apr-util.

Change Log:

apr-util-odbc - APR utility library ODBC DBD driver<br />

This package provides the ODBC driver for the apr-util DBD<br /> (database abstraction) interface.

Change Log:

apr-util-mysql - APR utility library MySQL DBD driver<br />

This package provides the MySQL driver for the apr-util DBD<br /> (database abstraction) interface.

Change Log:

apr-util-ldap - APR utility library LDAP support<br />

This package provides the LDAP support for the apr-util.

Change Log:

apr-util-devel - APR utility library development kit<br />

This package provides the support files which can be used to<br /> build applications using the APR utility library. The mission<br /> of the Apache Portable Runtime (APR) is to provide a free<br /> library of C data structures and routines.

Change Log:

apr-util-bdb - APR utility library Berkeley DB driver<br />

This package provides the Berkeley DB driver for the apr-util<br /> DBM (database abstraction) interface.

Change Log:

apr-util - Apache Portable Runtime Utility library<br />

The mission of the Apache Portable Runtime (APR) is to provide a<br /> free library of C data structures and routines. This library<br /> contains additional utility interfaces for APR; including support<br /> for XML, LDAP, database interfaces, URI parsing and more.

Change Log:

git-lfs - Git extension for versioning large files<br />

Git Large File Storage (LFS) replaces large files such as audio samples,<br /> videos, datasets, and graphics with text pointers inside Git, while<br /> storing the file contents on a remote server.

Change Log:

kernel-zfcpdump-devel-matched - Meta package to install matching core and devel packages for a given kernel<br />

This meta package is used to install matching core and devel packages for a given kernel.

Change Log:

kernel-zfcpdump-devel - Development package for building kernel modules to match the kernel<br />

This package provides kernel headers and makefiles sufficient to build modules<br /> against the kernel package.

Change Log:

kernel-headers - Header files for the Linux kernel for use by glibc<br />

Kernel-headers includes the C header files that specify the interface<br /> between the Linux kernel and userspace libraries and programs. The<br /> header files define structures and constants that are needed for<br /> building most standard programs and are also needed for rebuilding the<br /> glibc package.

Change Log:

kernel-devel-matched - Meta package to install matching core and devel packages for a given kernel<br />

This meta package is used to install matching core and devel packages for a given kernel.

Change Log:

kernel-devel - Development package for building kernel modules to match the kernel<br />

This package provides kernel headers and makefiles sufficient to build modules<br /> against the kernel package.

Change Log:

kernel-debug-devel-matched - Meta package to install matching core and devel packages for a given kernel<br />

This meta package is used to install matching core and devel packages for a given kernel.

Change Log:

kernel-debug-devel - Development package for building kernel modules to match the kernel<br />

This package provides kernel headers and makefiles sufficient to build modules<br /> against the kernel package.

Change Log:

perf - Performance monitoring for the Linux kernel<br />

This package contains the perf tool, which enables performance monitoring<br /> of the Linux kernel.

Change Log:

rv - RV: Runtime Verification<br />

Runtime Verification (RV) is a lightweight (yet rigorous) method that<br /> complements classical exhaustive verification techniques (such as model<br /> checking and theorem proving) with a more practical approach for<br /> complex systems.<br /> The rv tool is the interface for a collection of monitors that aim<br /> analysing the logical and timing behavior of Linux.

Change Log:

rtla - Real-Time Linux Analysis tools<br />

The rtla meta-tool includes a set of commands that aims to analyze<br /> the real-time properties of Linux. Instead of testing Linux as a black box,<br /> rtla leverages kernel tracing capabilities to provide precise information<br /> about the properties and root causes of unexpected results.

Change Log:

python3-perf - Python bindings for apps which will manipulate perf events<br />

The python3-perf package contains a module that permits applications<br /> written in the Python programming language to use the interface<br /> to manipulate perf events.

Change Log:

python3-lxml - XML processing library combining libxml2/libxslt with the ElementTree API<br />

lxml is a Pythonic, mature binding for the libxml2 and libxslt libraries. It<br /> provides safe and convenient access to these libraries using the ElementTree It<br /> extends the ElementTree API significantly to offer support for XPath, RelaxNG,<br /> XML Schema, XSLT, C14N and much more.To contact the project, go to the project<br /> home page < or see our bug tracker at case you want to use the current ...<br /> <br /> Python 3 version.

Change Log:

perl-DBI - A database access API for perl<br />

DBI is a database access Application Programming Interface (API) for<br /> the Perl Language. The DBI API Specification defines a set of<br /> functions, variables and conventions that provide a consistent<br /> database interface independent of the actual database being used.

Change Log:

python3.12-lxml - XML processing library combining libxml2/libxslt with the ElementTree API<br />

lxml is a Pythonic, mature binding for the libxml2 and libxslt libraries. It<br /> provides safe and convenient access to these libraries using the ElementTree It<br /> extends the ElementTree API significantly to offer support for XPath, RelaxNG,<br /> XML Schema, XSLT, C14N and much more.

Change Log:

qt5-qtbase-private-devel - Development files for qt5-qtbase private APIs<br />

Development files for qt5-qtbase private APIs.

Change Log:

qt5-qtbase-postgresql - PostgreSQL driver for Qt5's SQL classes<br />

PostgreSQL driver for Qt5's SQL classes.

Change Log:

qt5-qtbase-odbc - ODBC driver for Qt5's SQL classes<br />

ODBC driver for Qt5's SQL classes.

Change Log:

qt5-qtbase-mysql - MySQL driver for Qt5's SQL classes<br />

MySQL driver for Qt5's SQL classes.

Change Log:

qt5-qtbase-gui - Qt5 GUI-related libraries<br />

Qt5 libraries used for drawing widgets and OpenGL items.

Change Log:

qt5-qtbase-examples - Programming examples for qt5-qtbase<br />

Programming examples for qt5-qtbase.

Change Log:

qt5-qtbase-devel - Development files for qt5-qtbase<br />

Development files for qt5-qtbase.

Change Log:

qt5-qtbase - Qt5 - QtBase components<br />

Qt is a software toolkit for developing applications.<br /> <br /> This package contains base tools, like string, xml, and network<br /> handling.

Change Log:

qt5-qtbase-common - Common files for Qt5<br />

Common files for Qt5.

Change Log:

image-builder - An image building executable using osbuild<br />

<br /> A local binary for building customized OS artifacts such as VM images and<br /> OSTree commits. Uses osbuild under the hood.

Change Log:

dnsmasq-utils - Utilities for manipulating DHCP server leases<br />

Utilities that use the standard DHCP protocol to query/remove a DHCP<br /> server's leases.

Change Log:

dnsmasq - A lightweight DHCP/caching DNS server<br />

Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server.<br /> It is designed to provide DNS and, optionally, DHCP, to a small network.<br /> It can serve the names of local machines which are not in the global<br /> DNS. The DHCP server integrates with the DNS server and allows machines<br /> with DHCP-allocated addresses to appear in the DNS with names configured<br /> either in each host or in a central configuration file. Dnsmasq supports<br /> static and dynamic DHCP leases and BOOTP for network booting of diskless<br /> machines.

Change Log:

gpsd-minimal-clients - Clients for gpsd<br />

This package contains various clients using gpsd.<br /> <br /> The Red Hat support for this package is limited. See<br /> https://access.redhat.com/support/policy/gpsd-support for more details.

Change Log:

gpsd-minimal - Service daemon for mediating access to a GPS<br />

gpsd is a service daemon that mediates access to a GPS sensor<br /> connected to the host computer by serial or USB interface, making its<br /> data on the location/course/velocity of the sensor available to be<br /> queried on TCP port 2947 of the host computer.<br /> <br /> The Red Hat support for this package is limited. See<br /> https://access.redhat.com/support/policy/gpsd-support for more details.

Change Log:

unixODBC - A complete ODBC driver manager for Linux<br />

Install unixODBC if you want to access databases through ODBC.<br /> You will also need the mariadb-connector-odbc package if you want to access<br /> a MySQL or MariaDB database, and/or the postgresql-odbc package for PostgreSQL.

Change Log:

redis-devel - Development header for Redis module development<br />

Header file required for building loadable Redis modules. Detailed<br /> API documentation is available in the redis-doc package.

Change Log:

redis - A persistent key-value database<br />

Redis is an advanced key-value store. It is often referred to as a data<br /> structure server since keys can contain strings, hashes, lists, sets and<br /> sorted sets.<br /> <br /> You can run atomic operations on these types, like appending to a string;<br /> incrementing the value in a hash; pushing to a list; computing set<br /> intersection, union and difference; or getting the member with highest<br /> ranking in a sorted set.<br /> <br /> In order to achieve its outstanding performance, Redis works with an<br /> in-memory dataset. Depending on your use case, you can persist it either<br /> by dumping the dataset to disk every once in a while, or by appending<br /> each command to a log.<br /> <br /> Redis also supports trivial-to-setup master-slave replication, with very<br /> fast non-blocking first synchronization, auto-reconnection on net split<br /> and so forth.<br /> <br /> Other features include Transactions, Pub/Sub, Lua scripting, Keys with a<br /> limited time-to-live, and configuration settings to make Redis behave like<br /> a cache.<br /> <br /> You can use Redis from most programming languages also.

Change Log:

redis-doc - Documentation for Redis including man pages<br />

Manual pages and detailed documentation for many aspects of Redis use,<br /> administration and development.

Change Log:

thunderbird - Mozilla Thunderbird mail/newsgroup client<br />

Mozilla Thunderbird is a standalone mail and newsgroup client.

Change Log:

osbuild-composer-worker - The worker for osbuild-composer<br />

The worker for osbuild-composer

Change Log:

osbuild-composer-core - The core osbuild-composer binary<br />

The core osbuild-composer binary. This is suitable both for spawning in containers and by systemd.

Change Log:

osbuild-composer - An image building service based on osbuild<br />

<br /> A service for building customized OS artifacts, such as VM images and OSTree<br /> commits, that uses osbuild under the hood. Besides building images for local<br /> usage, it can also upload images directly to cloud.<br /> <br /> It is compatible with composer-cli and cockpit-composer clients.

Change Log:

opentelemetry-collector - Red Hat build of OpenTelemetry<br />

<br /> Collector with the supported components for a Red Hat build of OpenTelemetry

Change Log:

pam-docs - Extra documentation for PAM.<br />

PAM (Pluggable Authentication Modules) is a system security tool that<br /> allows system administrators to set authentication policy without<br /> having to recompile programs that handle authentication. The pam-docs<br /> contains extra documentation for PAM. Currently, this includes additional<br /> documentation in txt and html format.

Change Log:

pam-devel - Files needed for developing PAM-aware applications and modules for PAM<br />

PAM (Pluggable Authentication Modules) is a system security tool that<br /> allows system administrators to set authentication policy without<br /> having to recompile programs that handle authentication. This package<br /> contains header files used for building both PAM-aware applications<br /> and modules for use with the PAM system.

Change Log:

glib2-tests - Tests for the glib2 package<br />

The glib2-tests package contains tests that can be used to verify<br /> the functionality of the installed glib2 package.

Change Log:

glib2-devel - A library of handy utility functions<br />

The glib2-devel package includes the header files for the GLib library.

Change Log:

expat-devel - Libraries and header files to develop applications using expat<br />

The expat-devel package contains the libraries, include files and documentation<br /> to develop XML applications with expat.

Change Log:

glib2-doc - A library of handy utility functions<br />

The glib2-doc package includes documentation for the GLib library.

Change Log:

389-ds-base-snmp - SNMP Agent for 389 Directory Server<br />

SNMP Agent for the 389 Directory Server base package.

Change Log:

389-ds-base-libs - Core libraries for 389 Directory Server<br />

Core libraries for the 389 Directory Server base package. These libraries<br /> are used by the main package and the -devel package. This allows the -devel<br /> package to be installed with just the -libs package and without the main package.

Change Log:

389-ds-base - 389 Directory Server (base)<br />

389 Directory Server is an LDAPv3 compliant server. The base package includes<br /> the LDAP server and command line utilities for server administration.

Change Log:

python3-lib389 - A library for accessing, testing, and configuring the 389 Directory Server<br />

This module contains tools and libraries for accessing, testing,<br /> and configuring the 389 Directory Server.

Change Log:

python3.14-cryptography - PyCA's cryptography library<br />

cryptography is a package designed to expose cryptographic primitives and<br /> recipes to Python developers.

Change Log:

valkey-devel - Development header for Valkey module development<br />

Header file required for building loadable Valkey modules.

Change Log:

valkey - A persistent key-value database<br />

Valkey is an advanced key-value store. It is often referred to as a data<br /> structure server since keys can contain strings, hashes, lists, sets and<br /> sorted sets.<br /> <br /> You can run atomic operations on these types, like appending to a string;<br /> incrementing the value in a hash; pushing to a list; computing set<br /> intersection, union and difference; or getting the member with highest<br /> ranking in a sorted set.<br /> <br /> In order to achieve its outstanding performance, Valkey works with an<br /> in-memory dataset. Depending on your use case, you can persist it either<br /> by dumping the dataset to disk every once in a while, or by appending<br /> each command to a log.<br /> <br /> Valkey also supports trivial-to-setup master-slave replication, with very<br /> fast non-blocking first synchronization, auto-reconnection on net split<br /> and so forth.<br /> <br /> Other features include Transactions, Pub/Sub, Lua scripting, Keys with a<br /> limited time-to-live, and configuration settings to make Valkey behave like<br /> a cache.<br /> <br /> You can use Valkey from most programming languages also.

Change Log:

grafana-pcp - Performance Co-Pilot Grafana Plugin<br />

This Grafana plugin for Performance Co-Pilot includes data sources for<br /> scalable time series from pmseries(1) and Redis, live PCP metrics and<br /> bpftrace scripts from pmdabpftrace(1), as well as several dashboards.

Change Log:

grafana-selinux - SELinux policy module supporting grafana<br />

SELinux policy module supporting grafana

Change Log:

grafana - Metrics dashboard and graph editor<br />

Grafana is an open source, feature rich metrics dashboard and graph editor for<br /> Graphite, InfluxDB & OpenTSDB.

Change Log:

gegl04-tools - Command line tools for gegl04<br />

The gegl04-tools package contains tools for the command line that use the<br /> GEGL library.

Change Log:

gegl04-devel-docs - Documentation files for developing with gegl04<br />

The gegl04-devel-docs package contains documentation files for developing<br /> applications that use GEGL API version 0.4.

Change Log:

gegl04 - Graph based image processing framework<br />

GEGL (Generic Graphics Library) is a graph based image processing framework.<br /> GEGLs original design was made to scratch GIMP's itches for a new<br /> compositing and processing core. This core is being designed to have<br /> minimal dependencies and a simple well defined API.

Change Log:

libssh-devel - Development files for libssh<br />

The libssh-devel package contains libraries and header files for developing<br /> applications that use libssh.

Change Log:

wget - A utility for retrieving files using the HTTP or FTP protocols<br />

GNU Wget is a file retrieval utility which can use either the HTTP or<br /> FTP protocols. Wget features include the ability to work in the<br /> background while you are logged out, recursive retrieval of<br /> directories, file name wildcard matching, remote file timestamp<br /> storage and comparison, use of Rest with FTP servers and Range with<br /> HTTP servers to retrieve files over slow or unstable connections,<br /> support for Proxy servers, and configurability.

Change Log:

iperf3 - Measurement tool for TCP/UDP bandwidth performance<br />

Iperf is a tool to measure maximum TCP bandwidth, allowing the tuning of<br /> various parameters and UDP characteristics. Iperf reports bandwidth, delay<br /> jitter, data-gram loss.

Change Log:

xmlrpc-c-client - C client libraries for xmlrpc-c<br />

XML-RPC is a quick-and-easy way to make procedure calls over the<br /> Internet. It converts the procedure call into XML document, sends it<br /> to a remote server using HTTP, and gets back the response as XML.<br /> <br /> This library provides a modular implementation of XML-RPC for C<br /> clients.

Change Log:

xmlrpc-c - Lightweight RPC library based on XML and HTTP<br />

XML-RPC is a quick-and-easy way to make procedure calls over the<br /> Internet. It converts the procedure call into XML document, sends it<br /> to a remote server using HTTP, and gets back the response as XML.<br /> <br /> This library provides a modular implementation of XML-RPC for C.

Change Log:

pipewire-pulseaudio - PipeWire PulseAudio implementation<br />

This package provides a PulseAudio implementation based on PipeWire

Change Log:

pipewire-module-x11 - PipeWire media server x11 support<br />

This package contains X11 bell support for PipeWire.

Change Log:

pipewire-libs - Libraries for PipeWire clients<br />

This package contains the runtime libraries for any application that wishes<br /> to interface with a PipeWire media server.

Change Log:

pipewire-jack-audio-connection-kit-libs - PipeWire JACK implementation libraries<br />

This package provides a JACK implementation libraries based on PipeWire

Change Log:

pipewire-jack-audio-connection-kit-devel - Development files for pipewire-jack-audio-connection-kit<br />

This package provides development files for building JACK applications<br /> using PipeWire's JACK library.

Change Log:

pipewire-jack-audio-connection-kit - PipeWire JACK implementation<br />

This package provides a JACK implementation based on PipeWire

Change Log:

pipewire-gstreamer - GStreamer elements for PipeWire<br />

This package contains GStreamer elements to interface with a<br /> PipeWire media server.

Change Log:

pipewire-devel - Headers and libraries for PipeWire client development<br />

Headers and libraries for developing applications that can communicate with<br /> a PipeWire media server.

Change Log:

pipewire-alsa - PipeWire media server ALSA support<br />

This package contains an ALSA plugin for the PipeWire media server.

Change Log:

pipewire - Media Sharing Server<br />

PipeWire is a multimedia server for Linux and other Unix like operating<br /> systems.

Change Log:

php-xml - A module for PHP applications which use XML<br />

The php-xml package contains dynamic shared objects which add support<br /> to PHP for manipulating XML documents using the DOM tree,<br /> and performing XSL transformations on XML documents.

Change Log:

php-soap - A module for PHP applications that use the SOAP protocol<br />

The php-soap package contains a dynamic shared object that will add<br /> support to PHP for using the SOAP web services protocol.

Change Log:

php-snmp - A module for PHP applications that query SNMP-managed devices<br />

The php-snmp package contains a dynamic shared object that will add<br /> support for querying SNMP devices to PHP. PHP is an HTML-embeddable<br /> scripting language. If you need SNMP support for PHP applications, you<br /> will need to install this package and the php package.

Change Log:

php-process - Modules for PHP script using system process interfaces<br />

The php-process package contains dynamic shared objects which add<br /> support to PHP using system interfaces for inter-process<br /> communication.

Change Log:

php-pgsql - A PostgreSQL database module for PHP<br />

The php-pgsql package add PostgreSQL database support to PHP.<br /> PostgreSQL is an object-relational database management<br /> system that supports almost all SQL constructs. PHP is an<br /> HTML-embedded scripting language. If you need back-end support for<br /> PostgreSQL, you should install this package in addition to the main<br /> php package.

Change Log:

php-pdo - A database access abstraction module for PHP applications<br />

The php-pdo package contains a dynamic shared object that will add<br /> a database access abstraction layer to PHP. This module provides<br /> a common interface for accessing MySQL, PostgreSQL or other<br /> databases.

Change Log:

php-opcache - The Zend OPcache<br />

The Zend OPcache provides faster PHP execution through opcode caching and<br /> optimization. It improves PHP performance by storing precompiled script<br /> bytecode in the shared memory. This eliminates the stages of reading code from<br /> the disk and compiling it on future access. In addition, it applies a few<br /> bytecode optimization patterns that make code execution faster.

Change Log:

php-odbc - A module for PHP applications that use ODBC databases<br />

The php-odbc package contains a dynamic shared object that will add<br /> database support through ODBC to PHP. ODBC is an open specification<br /> which provides a consistent API for developers to use for accessing<br /> data sources (which are often, but not always, databases). PHP is an<br /> HTML-embeddable scripting language. If you need ODBC support for PHP<br /> applications, you will need to install this package and the php<br /> package.

Change Log:

php-mysqlnd - A module for PHP applications that use MySQL databases<br />

The php-mysqlnd package contains a dynamic shared object that will add<br /> MySQL database support to PHP. MySQL is an object-relational database<br /> management system. PHP is an HTML-embeddable scripting language. If<br /> you need MySQL support for PHP applications, you will need to install<br /> this package and the php package.<br /> <br /> This package use the MySQL Native Driver

Change Log:

php-mbstring - A module for PHP applications which need multi-byte string handling<br />

The php-mbstring package contains a dynamic shared object that will add<br /> support for multi-byte string handling to PHP.

Change Log:

php-ldap - A module for PHP applications that use LDAP<br />

The php-ldap adds Lightweight Directory Access Protocol (LDAP)<br /> support to PHP. LDAP is a set of protocols for accessing directory<br /> services over the Internet. PHP is an HTML-embedded scripting<br /> language.

Change Log:

php-intl - Internationalization extension for PHP applications<br />

The php-intl package contains a dynamic shared object that will add<br /> support for using the ICU library to PHP.

Change Log:

php-gmp - A module for PHP applications for using the GNU MP library<br />

These functions allow you to work with arbitrary-length integers<br /> using the GNU MP library.

Change Log:

php-gd - A module for PHP applications for using the gd graphics library<br />

The php-gd package contains a dynamic shared object that will add<br /> support for using the gd graphics library to PHP.

Change Log:

php-fpm - PHP FastCGI Process Manager<br />

PHP-FPM (FastCGI Process Manager) is an alternative PHP FastCGI<br /> implementation with some additional features useful for sites of<br /> any size, especially busier sites.

Change Log:

php-ffi - Foreign Function Interface<br />

FFI is one of the features that made Python and LuaJIT very useful for fast<br /> prototyping. It allows calling C functions and using C data types from pure<br /> scripting language and therefore develop “system code” more productively.<br /> <br /> For PHP, FFI opens a way to write PHP extensions and bindings to C libraries<br /> in pure PHP.

Change Log:

php-enchant - Enchant spelling extension for PHP applications<br />

The php-enchant package contains a dynamic shared object that will add<br /> support for using the enchant library to PHP.

Change Log:

php-embedded - PHP library for embedding in applications<br />

The php-embedded package contains a library which can be embedded<br /> into applications to provide PHP scripting language support.

Change Log:

php-devel - Files needed for building PHP extensions<br />

The php-devel package contains the files needed for building PHP<br /> extensions. If you need to compile your own PHP extensions, you will<br /> need to install this package.

Change Log:

php-dbg - The interactive PHP debugger<br />

The php-dbg package contains the interactive PHP debugger.

Change Log:

php-dba - A database abstraction layer module for PHP applications<br />

The php-dba package contains a dynamic shared object that will add<br /> support for using the DBA database abstraction layer to PHP.

Change Log:

php-common - Common files for PHP<br />

The php-common package contains files used by both the php<br /> package and the php-cli package.

Change Log:

php-cli - Command-line interface for PHP<br />

The php-cli package contains the command-line interface<br /> executing PHP scripts, /usr/bin/php, and the CGI interface.

Change Log:

php-bcmath - A module for PHP applications for using the bcmath library<br />

The php-bcmath package contains a dynamic shared object that will add<br /> support for using the bcmath library to PHP.

Change Log:

php - PHP scripting language for creating dynamic web sites<br />

PHP is an HTML-embedded scripting language. PHP attempts to make it<br /> easy for developers to write dynamically generated web pages. PHP also<br /> offers built-in database integration for several commercial and<br /> non-commercial database management systems, so writing a<br /> database-enabled webpage with PHP is fairly simple. The most common<br /> use of PHP coding is probably as a replacement for CGI scripts.

Change Log:

libxml2-devel - Libraries, includes, etc. to develop XML and HTML applications<br />

Libraries, include files, etc you can use to develop XML applications.<br /> This library allows to manipulate XML files. It includes support<br /> to read, modify and write XML and HTML files. There is DTDs support<br /> this includes parsing and validation even with complex DtDs, either<br /> at parse time or later once the document has been modified. The output<br /> can be a simple SAX stream or and in-memory DOM like representations.<br /> In this case one can use the built-in XPath and XPointer implementation<br /> to select sub nodes or ranges. A flexible Input/Output mechanism is<br /> available, with existing HTTP and FTP modules and combined to an<br /> URI library.

Change Log:

golang-race - Race detetector library object files.<br />

Binary library objects for Go's race detector.

Change Log:

golang-bin - Golang core compiler tools<br />

Golang core compiler tools

Change Log:

golang - The Go Programming Language<br />

The Go Programming Language.

Change Log:

go-toolset - Package that installs go-toolset<br />

This is the main package for go-toolset.

Change Log:

golang-tests - Golang compiler tests for stdlib<br />

Golang compiler tests for stdlib.

Change Log:

golang-src - Golang compiler source tree<br />

Golang compiler source tree

Change Log:

golang-misc - Golang compiler miscellaneous sources<br />

Golang compiler miscellaneous sources.

Change Log:

golang-docs - Golang compiler docs<br />

Golang compiler docs.

Change Log:

fence-agents-zvm - Fence agent for IBM z/VM over IP<br />

Fence agent for IBM z/VM over IP.

Change Log:

fence-agents-redfish - Fence agent for Redfish<br />

The fence-agents-redfish package contains a fence agent for Redfish

Change Log:

fence-agents-kubevirt - Fence agent for KubeVirt platform<br />

Fence agent for KubeVirt platform.

Change Log:

fence-agents-kdump - Fence agent for use with kdump crash recovery service<br />

Fence agent for use with kdump crash recovery service.

Change Log:

fence-agents-all - Set of unified programs capable of host isolation ("fencing")<br />

A collection of executables to handle isolation ("fencing") of possibly<br /> misbehaving hosts by the means of remote power management, blocking<br /> network, storage, or similar.<br /> <br /> This package serves as a catch-all for all supported fence agents.

Change Log:

fence-agents-wti - Fence agent for WTI Network power switches<br />

Fence agent for WTI network power switches that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-vmware-soap - Fence agent for VMWare with SOAP API v4.1+<br />

Fence agent for VMWare with SOAP API v4.1+.

Change Log:

fence-agents-vmware-rest - Fence agent for VMWare with REST API<br />

Fence agent for VMWare with REST API.

Change Log:

fence-agents-virsh - Fence agent for virtual machines based on libvirt<br />

Fence agent for virtual machines that are accessed via SSH.

Change Log:

fence-agents-scsi - Fence agent for SCSI persistent reservations<br />

Fence agent for SCSI persistent reservations.

Change Log:

fence-agents-sbd - Fence agent for SBD (storage-based death)<br />

Fence agent for SBD (storage-based death).

Change Log:

fence-agents-rsb - Fence agent for Fujitsu RSB<br />

Fence agent for Fujitsu RSB devices that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-rsa - Fence agent for IBM RSA II<br />

Fence agent for IBM RSA II devices that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-rhevm - Fence agent for RHEV-M<br />

Fence agent for RHEV-M via REST API.

Change Log:

fence-agents-nutanix-ahv - Fence agent for Nutanix AHV<br />

Fence agent for Nutanix AHV clusters.

Change Log:

fence-agents-mpath - Fence agent for reservations over Device Mapper Multipath<br />

Fence agent for SCSI persistent reservation over<br /> Device Mapper Multipath.

Change Log:

fence-agents-lpar - Fence agent for IBM LPAR<br />

Fence agent for IBM LPAR devices that are accessed via telnet or SSH.

Change Log:

fence-agents-ipmilan - Fence agents for devices with IPMI interface<br />

Fence agents for devices with IPMI interface.

Change Log:

fence-agents-ipdu - Fence agent for IBM iPDU network power switches<br />

Fence agent for IBM iPDU network power switches that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-intelmodular - Fence agent for devices with Intel Modular interfaces<br />

Fence agent for Intel Modular interfaces that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-ilo2 - Fence agents for HP iLO2 devices<br />

Fence agents for HP iLO2 devices that are accessed via<br /> the HTTP(s) protocol.

Change Log:

fence-agents-ilo-ssh - Fence agents for HP iLO devices over SSH<br />

Fence agents for HP iLO devices that are accessed via telnet or SSH.

Change Log:

fence-agents-ilo-mp - Fence agent for HP iLO MP devices<br />

Fence agent for HP iLO MP devices that are accessed via telnet or SSH.

Change Log:

fence-agents-ilo-moonshot - Fence agent for HP iLO Moonshot devices<br />

Fence agent for HP iLO Moonshot devices that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-ifmib - Fence agent for devices with IF-MIB interfaces<br />

Fence agent for IF-MIB interfaces that are accessed via<br /> the SNMP protocol.

Change Log:

fence-agents-ibmblade - Fence agent for IBM BladeCenter<br />

Fence agent for IBM BladeCenter devices that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-ibm-vpc - Fence agent for IBM Cloud VPC<br />

Fence agent for IBM Cloud VPC that are accessed via REST API.

Change Log:

fence-agents-ibm-powervs - Fence agent for IBM PowerVS<br />

Fence agent for IBM PowerVS that are accessed via REST API.

Change Log:

fence-agents-hpblade - Fence agent for HP BladeSystem devices<br />

Fence agent for HP BladeSystem devices that are accessed via telnet<br /> or SSH.

Change Log:

fence-agents-heuristics-ping - Pseudo fence agent to affect other agents based on ping-heuristics<br />

Fence pseudo agent used to affect other agents based on<br /> ping-heuristics.

Change Log:

fence-agents-eps - Fence agent for ePowerSwitch 8M+ power switches<br />

Fence agent for ePowerSwitch 8M+ power switches that are accessed<br /> via the HTTP(s) protocol.

Change Log:

fence-agents-emerson - Fence agent for Emerson devices (SNMP)<br />

Fence agent for Emerson devices that are accessed via<br /> the SNMP protocol.

Change Log:

fence-agents-eaton-snmp - Fence agent for Eaton network power switches<br />

Fence agent for Eaton network power switches that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-drac5 - Fence agent for Dell DRAC 5<br />

Fence agent for Dell DRAC 5 series devices that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-common - Common base for Fence Agents<br />

A collection of executables to handle isolation ("fencing") of possibly<br /> misbehaving hosts by the means of remote power management, blocking<br /> network, storage, or similar.<br /> <br /> This package contains support files including the Python fencing library.

Change Log:

fence-agents-cisco-ucs - Fence agent for Cisco UCS series<br />

Fence agent for Cisco UCS series devices that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-cisco-mds - Fence agent for Cisco MDS 9000 series<br />

Fence agent for Cisco MDS 9000 series devices that are accessed<br /> via the SNMP protocol.

Change Log:

fence-agents-brocade - Fence agent for Brocade switches<br />

Fence agent for Brocade devices that are accessed via telnet or SSH.

Change Log:

fence-agents-bladecenter - Fence agent for IBM BladeCenter<br />

Fence agent for IBM BladeCenter devices that are accessed<br /> via telnet or SSH.

Change Log:

fence-agents-apc-snmp - Fence agents for APC devices (SNMP)<br />

Fence agents for APC devices that are accessed via the SNMP protocol.

Change Log:

fence-agents-apc - Fence agent for APC devices<br />

Fence agent for APC devices that are accessed via telnet or SSH.

Change Log:

fence-agents-amt-ws - Fence agent for Intel AMT (WS-Man) devices<br />

Fence agent for AMT (WS-Man) devices.

Change Log:

gnome-control-center - Utilities to configure the GNOME desktop<br />

This package contains configuration utilities for the GNOME desktop, which<br /> allow to configure accessibility options, desktop fonts, keyboard and mouse<br /> properties, sound setup, desktop theme and background, user interface<br /> properties, screen resolution, and other settings.

Change Log:

podman-tests - Tests for podman<br />

Tests for podman<br /> <br /> This package contains system tests for podman. Only intended to be used for<br /> gating tests. Not supported for end users / customers.

Change Log:

podman-remote - A remote CLI for Podman: A Simple management tool for pods, containers and images<br />

podman-remote provides a local client interacting with a Podman backend<br /> node through a RESTful API tunneled through a ssh connection. In this context,<br /> a podman node is a Linux system with Podman installed on it and the API<br /> service activated.<br /> <br /> Credentials for this session can be passed in using flags, environment<br /> variables, or in containers.conf.

Change Log:

podman-plugins - Plugins for podman<br />

This plugin sets up the use of dnsmasq on a given CNI network so<br /> that Pods can resolve each other by name. When configured,<br /> the pod and its IP address are added to a network specific hosts file<br /> that dnsmasq will read in. Similarly, when a pod<br /> is removed from the network, it will remove the entry from the hosts<br /> file. Each CNI network will have its own dnsmasq instance.

Change Log:

podman - Manage Pods, Containers and Container Images<br />

podman (Pod Manager) is a fully featured container engine that is a simple<br /> daemonless tool. podman provides a Docker-CLI comparable command line that<br /> eases the transition from other container engines and allows the management of<br /> pods, containers and images. Simply put: alias docker=podman.<br /> Most podman commands can be run as a regular user, without requiring<br /> additional privileges.<br /> <br /> podman uses Buildah(1) internally to create container images.<br /> Both tools share image (not container) storage, hence each can use or<br /> manipulate images (but not containers) created by the other.<br /> <br /> Manage Pods, Containers and Container Images<br /> podman Simple management tool for pods, containers and images

Change Log:

podman-docker - Emulate Docker CLI using podman<br />

This package installs a script named docker that emulates the Docker CLI by<br /> executes podman commands, it also creates links between all Docker CLI man<br /> pages and podman.

Change Log:

gtk3-immodule-xim - XIM support for GTK+<br />

The gtk3-immodule-xim package contains XIM support for GTK+ 3.

Change Log:

gtk3-devel - Development files for GTK+<br />

This package contains the libraries and header files that are needed<br /> for writing applications with version 3 of the GTK+ widget toolkit. If<br /> you plan to develop applications with GTK+, consider installing the<br /> gtk3-devel-docs package.

Change Log:

gtk3 - GTK+ graphical user interface library<br />

GTK+ is a multi-platform toolkit for creating graphical user<br /> interfaces. Offering a complete set of widgets, GTK+ is suitable for<br /> projects ranging from small one-off tools to complete application<br /> suites.<br /> <br /> This package contains version 3 of GTK+.

Change Log:

gtk-update-icon-cache - Icon theme caching utility<br />

GTK+ can use the cache files created by gtk-update-icon-cache to avoid a lot of<br /> system call and disk seek overhead when the application starts. Since the<br /> format of the cache files allows them to be mmap()ed shared between multiple<br /> applications, the overall memory consumption is reduced as well.

Change Log:

gnome-control-center-filesystem - GNOME Control Center directories<br />

The GNOME control-center provides a number of extension points<br /> for applications. This package contains directories where applications<br /> can install configuration files that are picked up by the control-center<br /> utilities.

Change Log:

bootc - Bootable container system<br />

Bootable container system

Change Log:

system-reinstall-bootc - Utility to reinstall the current system using bootc<br />

This package provides a utility to simplify reinstalling the current system to a given bootc image.

Change Log:

mutter - Window and compositing manager based on Clutter<br />

Mutter is a window and compositing manager that displays and manages<br /> your desktop via OpenGL. Mutter combines a sophisticated display engine<br /> using the Clutter toolkit with solid window-management logic inherited<br /> from the Metacity window manager.<br /> <br /> While Mutter can be used stand-alone, it is primarily intended to be<br /> used as the display core of a larger system such as GNOME Shell. For<br /> this reason, Mutter is very extensible via plugins, which are used both<br /> to add fancy visual effects and to rework the window management<br /> behaviors to meet the needs of the environment.

Change Log:

bluez-cups - CUPS printer backend for Bluetooth printers<br />

This package contains the CUPS backend

Change Log:

smc-tools - Shared Memory Communication Tools<br />

The Shared Memory Communication Tools (smc-tools) package enables usage of SMC<br /> sockets in Linux.

Change Log:

libattr-devel - Files needed for building programs with libattr<br />

This package contains header files and documentation needed to<br /> develop programs which make use of extended attributes.<br /> For Linux programs, the documented system call API is the<br /> recommended interface, but an SGI IRIX compatibility interface<br /> is also provided.<br /> <br /> Currently only ext2, ext3, ext4 and XFS support extended attributes.<br /> The SGI IRIX compatibility API built above the Linux system calls is<br /> used by programs such as xfsdump(8), xfsrestore(8) and xfs_fsr(8).<br /> <br /> You should install libattr-devel if you want to develop programs<br /> which make use of extended attributes. If you install libattr-devel,<br /> you'll also want to install attr.

Change Log:

assertj-core - Library of assertions similar to fest-assert<br />

A rich and intuitive set of strongly-typed assertions to use for unit testing<br /> (either with JUnit or TestNG).

Change Log:

mod_http2 - module implementing HTTP/2 for Apache 2<br />

The mod_h2 Apache httpd module implements the HTTP2 protocol (h2+h2c) on<br /> top of libnghttp2 for httpd 2.4 servers.

Change Log:

httpd-tools - Tools for use with the Apache HTTP Server<br />

The httpd-tools package contains tools which can be used with<br /> the Apache HTTP Server.

Change Log:

httpd-devel - Development interfaces for the Apache HTTP Server<br />

The httpd-devel package contains the APXS binary and other files<br /> that you need to build Dynamic Shared Objects (DSOs) for the<br /> Apache HTTP Server.<br /> <br /> If you are installing the Apache HTTP Server and you want to be<br /> able to compile or develop additional modules for Apache, you need<br /> to install this package.

Change Log:

httpd-core - httpd minimal core<br />

The httpd-core package contains essential httpd binaries.

Change Log:

httpd - Apache HTTP Server<br />

The Apache HTTP Server is a powerful, efficient, and extensible<br /> web server.

Change Log:

mod_ssl - SSL/TLS module for the Apache HTTP Server<br />

The mod_ssl module provides strong cryptography for the Apache HTTP<br /> server via the Secure Sockets Layer (SSL) and Transport Layer<br /> Security (TLS) protocols.

Change Log:

mod_session - Session interface for the Apache HTTP Server<br />

The mod_session module and associated backends provide an abstract<br /> interface for storing and accessing per-user session data.

Change Log:

mod_proxy_html - HTML and XML content filters for the Apache HTTP Server<br />

The mod_proxy_html and mod_xml2enc modules provide filters which can<br /> transform and modify HTML and XML content.

Change Log:

mod_lua - Lua scripting support for the Apache HTTP Server<br />

The mod_lua module allows the server to be extended with scripts<br /> written in the Lua programming language.

Change Log:

mod_ldap - LDAP authentication modules for the Apache HTTP Server<br />

The mod_ldap and mod_authnz_ldap modules add support for LDAP<br /> authentication to the Apache HTTP Server.

Change Log:

httpd-manual - Documentation for the Apache HTTP Server<br />

The httpd-manual package contains the complete manual and<br /> reference guide for the Apache HTTP Server. The information can<br /> also be found at https://httpd.apache.org/docs/2.4/.

Change Log:

httpd-filesystem - The basic directory layout for the Apache HTTP Server<br />

The httpd-filesystem package contains the basic directory layout<br /> for the Apache HTTP Server including the correct permissions<br /> for the directories.

Change Log:

python3-pyasn1-modules - Modules for pyasn1<br />

ASN.1 types modules for python3-pyasn1.

Change Log:

python3-pyasn1 - ASN.1 tools for Python 3<br />

This is an implementation of ASN.1 types and codecs in the Python 3 programming<br /> language.

Change Log:

gstreamer1-plugins-good-gtk - GStreamer "good" plugins gtk plugin<br />

GStreamer is a streaming media framework, based on graphs of elements which<br /> operate on media data.<br /> <br /> GStreamer Good Plugins is a collection of well-supported plugins of<br /> good quality and under the LGPL license.<br /> <br /> This package (gstreamer1-plugins-good-gtk) contains the gtksink output plugin.

Change Log:

gstreamer1-plugins-good - GStreamer plugins with good code and licensing<br />

GStreamer is a streaming media framework, based on graphs of filters which<br /> operate on media data. Applications using this library can do anything<br /> from real-time sound processing to playing videos, and just about anything<br /> else media-related. Its plugin-based architecture means that new data<br /> types or processing capabilities can be added simply by installing new<br /> plugins.<br /> <br /> GStreamer Good Plugins is a collection of well-supported plugins of<br /> good quality and under the LGPL license.

Change Log:

python3.12-tkinter - A GUI toolkit for Python<br />

The Tkinter (Tk interface) library is a graphical user interface toolkit for<br /> the Python programming language.

Change Log:

python3.12-libs - Python runtime libraries<br />

This package contains runtime libraries for use by Python:<br /> - the majority of the Python standard library<br /> - a dynamically linked library for use by applications that embed Python as<br /> a scripting language, and by the main "python3.12" executable

Change Log:

python3.12-devel - Libraries and header files needed for Python development<br />

This package contains the header files and configuration needed to compile<br /> Python extension modules (typically written in C or C++), to embed Python<br /> into other programs, and to make binary distributions for Python libraries.<br /> <br /> It also contains the necessary macros to build RPM packages with Python modules<br /> and 2to3 tool, an automatic source converter from Python 2.X.

Change Log:

python3.12 - Version 3.12 of the Python interpreter<br />

Python 3.12 is an accessible, high-level, dynamically typed, interpreted<br /> programming language, designed with an emphasis on code readability.<br /> It includes an extensive standard library, and has a vast ecosystem of<br /> third-party libraries.<br /> <br /> The python3.12 package provides the "python3.12" executable: the reference<br /> interpreter for the Python language, version 3.<br /> The majority of its standard library is provided in the python3.12-libs package,<br /> which should be installed automatically along with python3.12.<br /> The remaining parts of the Python standard library are broken out into the<br /> python3.12-tkinter and python3.12-test packages, which may need to be installed<br /> separately.<br /> <br /> Documentation for Python is provided in the python3.12-docs package.<br /> <br /> Packages containing additional libraries for Python are generally named with<br /> the "python3.12-" prefix.

Change Log:

python3.14-tkinter - A GUI toolkit for Python<br />

The Tkinter (Tk interface) library is a graphical user interface toolkit for<br /> the Python programming language.

Change Log:

python3.14-libs - Python runtime libraries<br />

This package contains runtime libraries for use by Python:<br /> - the majority of the Python standard library<br /> - a dynamically linked library for use by applications that embed Python as<br /> a scripting language, and by the main "python3.14" executable

Change Log:

python3.14-devel - Libraries and header files needed for Python development<br />

This package contains the header files and configuration needed to compile<br /> Python extension modules (typically written in C or C++), to embed Python<br /> into other programs, and to make binary distributions for Python libraries.

Change Log:

python3.14 - Version 3.14 of the Python interpreter<br />

Python 3.14 is an accessible, high-level, dynamically typed, interpreted<br /> programming language, designed with an emphasis on code readability.<br /> It includes an extensive standard library, and has a vast ecosystem of<br /> third-party libraries.<br /> <br /> The python3.14 package provides the "python3.14" executable: the reference<br /> interpreter for the Python language, version 3.<br /> The majority of its standard library is provided in the python3.14-libs package,<br /> which should be installed automatically along with python3.14.<br /> The remaining parts of the Python standard library are broken out into the<br /> python3.14-tkinter and python3.14-test packages, which may need to be installed<br /> separately.<br /> <br /> Documentation for Python is provided in the python3.14-docs package.<br /> <br /> Packages containing additional libraries for Python are generally named with<br /> the "python3.14-" prefix.

Change Log:

firefox-x11 - Firefox X11 launcher.<br />

The firefox-x11 package contains launcher and desktop file<br /> to run Firefox explicitly on X11.

Change Log:

firefox - Mozilla Firefox Web browser<br />

Mozilla Firefox is an open-source web browser, designed for standards<br /> compliance, performance and portability.

Change Log:

sqlite-devel - Development tools for the sqlite3 embeddable SQL database engine<br />

This package contains the header files and development documentation<br /> for sqlite. If you like to develop programs using sqlite, you will need<br /> to install sqlite-devel.

Change Log:

sqlite - Library that implements an embeddable SQL database engine<br />

SQLite is a C library that implements an SQL database engine. A large<br /> subset of SQL92 is supported. A complete database is stored in a<br /> single disk file. The API is designed for convenience and ease of use.<br /> Applications that link against SQLite can enjoy the power and<br /> flexibility of an SQL database without the administrative hassles of<br /> supporting a separate database server. Version 2 and version 3 binaries<br /> are named to permit each to be installed on a single host

Change Log:

cups-filters-libs - OpenPrinting CUPS filters and backends - cupsfilters and fontembed libraries<br />

This package provides cupsfilters and fontembed libraries.

Change Log:

cups-filters - OpenPrinting CUPS filters and backends<br />

Contains backends, filters, and other software that was<br /> once part of the core CUPS distribution but is no longer maintained by<br /> Apple Inc. In addition it contains additional filters developed<br /> independently of Apple, especially filters for the PDF-centric printing<br /> workflow introduced by OpenPrinting.

Change Log:

NetworkManager-ppp - PPP plugin for NetworkManager<br />

This package contains NetworkManager support for PPP.

Change Log:

NetworkManager-ovs - Open vSwitch device plugin for NetworkManager<br />

This package contains NetworkManager support for Open vSwitch bridges.

Change Log:

NetworkManager-cloud-setup - Automatically configure NetworkManager in cloud<br />

Installs a nm-cloud-setup tool that can automatically configure<br /> NetworkManager in cloud environment. Only certain cloud providers<br /> like Aliyun, Azure, EC2, GCP are supported.

Change Log:

NetworkManager-dispatcher-routing-rules - NetworkManager dispatcher file for advanced routing rules<br />

This adds a NetworkManager dispatcher file to support networking<br /> configurations using "/etc/sysconfig/network-scripts/rule-NAME" files<br /> (eg, to do policy-based routing).

Change Log:

NetworkManager-config-connectivity-redhat - NetworkManager config file for connectivity checking via Red Hat servers<br />

This adds a NetworkManager configuration file to enable connectivity checking<br /> via Red Hat infrastructure.

Change Log:

mrtg - Multi Router Traffic Grapher<br />

The Multi Router Traffic Grapher (MRTG) is a tool to monitor the traffic<br /> load on network-links. MRTG generates HTML pages containing PNG<br /> images which provide a LIVE visual representation of this traffic.

Change Log:

java-25-openjdk-static-libs - OpenJDK 25 libraries for static linking<br />

The OpenJDK 25 libraries for static linking.

Change Log:

java-25-openjdk-src - OpenJDK 25 Source Bundle<br />

The java-25-openjdk-src sub-package contains the complete OpenJDK 25<br /> class library source code for use by IDE indexers and debuggers.

Change Log:

java-25-openjdk-jmods - JMods for OpenJDK 25<br />

The JMods for OpenJDK 25.

Change Log:

java-25-openjdk-javadoc-zip - OpenJDK 25 API documentation compressed in a single archive<br />

The OpenJDK 25 API documentation compressed in a single archive.

Change Log:

java-25-openjdk-javadoc - OpenJDK 25 API documentation<br />

The OpenJDK 25 API documentation.

Change Log:

java-25-openjdk-headless - OpenJDK 25 Headless Runtime Environment<br />

The OpenJDK 25 runtime environment without audio and video support.

Change Log:

java-25-openjdk-devel - OpenJDK 25 Development Environment<br />

The OpenJDK 25 development tools.

Change Log:

java-25-openjdk-demo - OpenJDK 25 Demos<br />

The OpenJDK 25 demos.

Change Log:

java-25-openjdk-crypto-adapter - OpenJDK 25 Cryptography Adapter Library<br />

The OpenJDK 25 cryptography adapter library.

Change Log:

java-25-openjdk - OpenJDK 25 Runtime Environment<br />

The OpenJDK 25 runtime environment.

Change Log:

java-17-openjdk-static-libs - OpenJDK 17 libraries for static linking<br />

The OpenJDK 17 libraries for static linking.

Change Log:

java-17-openjdk-src - OpenJDK 17 Source Bundle<br />

The java-17-openjdk-src sub-package contains the complete OpenJDK 17<br /> class library source code for use by IDE indexers and debuggers.

Change Log:

java-17-openjdk-jmods - JMods for OpenJDK 17<br />

The JMods for OpenJDK 17.

Change Log:

java-17-openjdk-javadoc-zip - OpenJDK 17 API documentation compressed in a single archive<br />

The OpenJDK 17 API documentation compressed in a single archive.

Change Log:

java-17-openjdk-javadoc - OpenJDK 17 API documentation<br />

The OpenJDK 17 API documentation.

Change Log:

java-17-openjdk-headless - OpenJDK 17 Headless Runtime Environment<br />

The OpenJDK 17 runtime environment without audio and video support.

Change Log:

java-17-openjdk-devel - OpenJDK 17 Development Environment<br />

The OpenJDK 17 development tools.

Change Log:

java-17-openjdk-demo - OpenJDK 17 Demos<br />

The OpenJDK 17 demos.

Change Log:

java-17-openjdk - OpenJDK 17 Runtime Environment<br />

The OpenJDK 17 runtime environment.

Change Log:

java-1.8.0-openjdk-src - OpenJDK 8 Source Bundle<br />

The java-1.8.0-openjdk-src sub-package contains the complete OpenJDK 8<br /> class library source code for use by IDE indexers and debuggers.

Change Log:

java-1.8.0-openjdk-headless - OpenJDK 8 Headless Runtime Environment<br />

The OpenJDK 8 runtime environment without audio and video support.

Change Log:

java-1.8.0-openjdk-devel - OpenJDK 8 Development Environment<br />

The OpenJDK 8 development tools.

Change Log:

java-1.8.0-openjdk-demo - OpenJDK 8 Demos<br />

The OpenJDK 8 demos.

Change Log:

java-1.8.0-openjdk - OpenJDK 8 Runtime Environment<br />

The OpenJDK 8 runtime environment.

Change Log:

java-1.8.0-openjdk-javadoc-zip - OpenJDK 8 API documentation compressed in a single archive<br />

The OpenJDK 8 API documentation compressed in a single archive.

Change Log:

java-1.8.0-openjdk-javadoc - OpenJDK 8 API documentation<br />

The OpenJDK 8 API documentation.

Change Log:

java-21-openjdk-static-libs - OpenJDK 21 libraries for static linking<br />

The OpenJDK 21 libraries for static linking.

Change Log:

java-21-openjdk-src - OpenJDK 21 Source Bundle<br />

The java-21-openjdk-src sub-package contains the complete OpenJDK 21<br /> class library source code for use by IDE indexers and debuggers.

Change Log:

java-21-openjdk-jmods - JMods for OpenJDK 21<br />

The JMods for OpenJDK 21.

Change Log:

java-21-openjdk-javadoc-zip - OpenJDK 21 API documentation compressed in a single archive<br />

The OpenJDK 21 API documentation compressed in a single archive.

Change Log:

java-21-openjdk-javadoc - OpenJDK 21 API documentation<br />

The OpenJDK 21 API documentation.

Change Log:

java-21-openjdk-headless - OpenJDK 21 Headless Runtime Environment<br />

The OpenJDK 21 runtime environment without audio and video support.

Change Log:

java-21-openjdk-devel - OpenJDK 21 Development Environment<br />

The OpenJDK 21 development tools.

Change Log:

java-21-openjdk-demo - OpenJDK 21 Demos<br />

The OpenJDK 21 demos.

Change Log:

java-21-openjdk - OpenJDK 21 Runtime Environment<br />

The OpenJDK 21 runtime environment.

Change Log:

nss-util-devel - Development libraries for Network Security Services Utilities<br />

Header and library files for doing development with Network Security Services.

Change Log:

nss-util - Network Security Services Utilities Library<br />

Utilities for Network Security Services and the Softoken module

Change Log:

nss-tools - Tools for the Network Security Services<br />

Network Security Services (NSS) is a set of libraries designed to<br /> support cross-platform development of security-enabled client and<br /> server applications. Applications built with NSS can support SSL v2<br /> and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509<br /> v3 certificates, and other security standards.<br /> <br /> Install the nss-tools package if you need command-line tools to<br /> manipulate the NSS certificate and key database.

Change Log:

nss-sysinit - System NSS Initialization<br />

Default Operating System module that manages applications loading<br /> NSS globally on the system. This module loads the system defined<br /> PKCS #11 modules for NSS and chains with other NSS modules to load<br /> any system or user configured modules.

Change Log:

nss-softokn-freebl-devel - Header and Library files for doing development with the Freebl library for NSS<br />

NSS Softoken Cryptographic Module Freebl Library Development Tools<br /> This package supports special needs of some PKCS #11 module developers and<br /> is otherwise considered private to NSS. As such, the programming interfaces<br /> may change and the usual NSS binary compatibility commitments do not apply.<br /> Developers should rely only on the officially supported NSS public API.

Change Log:

nss-softokn-freebl - Freebl library for the Network Security Services<br />

NSS Softoken Cryptographic Module Freebl Library<br /> <br /> Install the nss-softokn-freebl package if you need the freebl library.

Change Log:

nss-softokn-devel - Development libraries for Network Security Services<br />

Header and library files for doing development with Network Security Services.

Change Log:

nss-softokn - Network Security Services Softoken Module<br />

Network Security Services Softoken Cryptographic Module

Change Log:

nss-devel - Development libraries for Network Security Services<br />

Header and Library files for doing development with Network Security Services.

Change Log:

nss - Network Security Services<br />

Network Security Services (NSS) is a set of libraries designed to<br /> support cross-platform development of security-enabled client and<br /> server applications. Applications built with NSS can support SSL v2<br /> and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509<br /> v3 certificates, and other security standards.

Change Log:

nspr-devel - Development libraries for the Netscape Portable Runtime<br />

Header files for doing development with the Netscape Portable Runtime.

Change Log:

nspr - Netscape Portable Runtime<br />

NSPR provides platform independence for non-GUI operating system<br /> facilities. These facilities include threads, thread synchronization,<br /> normal file and network I/O, interval timing and calendar time, basic<br /> memory management (malloc and free) and shared library linking.

Change Log:

ansible-test - Tool for testing ansible plugin and module code<br />

Ansible is a radically simple model-driven configuration management,<br /> multi-node deployment, and remote task execution system. Ansible works<br /> over SSH and does not require any software or daemons to be installed<br /> on remote nodes. Extension modules can be written in any language and<br /> are transferred to managed machines automatically.<br /> <br /> This package installs the ansible-test command for testing modules and plugins<br /> developed for ansible.

Change Log:

ansible-core - SSH-based configuration management, deployment, and task execution system<br />

Ansible is a radically simple model-driven configuration management,<br /> multi-node deployment, and remote task execution system. Ansible works<br /> over SSH and does not require any software or daemons to be installed<br /> on remote nodes. Extension modules can be written in any language and<br /> are transferred to managed machines automatically.

Change Log:

perl-Date-Manip - Date manipulation routines<br />

Date::Manip is a series of modules designed to make any common date/time<br /> operation easy to do. Operations such as comparing two times, determining<br /> a data a given amount of time from another, or parsing international times<br /> are all easily done. It deals with time as it is used in the Gregorian<br /> calendar (the one currently in use) with full support for time changes due<br /> to daylight saving time.

Change Log:

dotnet-templates-10.0 - .NET 10.0 templates<br />

This package contains templates used by the .NET SDK.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-targeting-pack-10.0 - Targeting Pack for Microsoft.NETCore.App 10.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 10.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 10.0<br /> applications using the .NET SDK.

Change Log:

dotnet-sdk-dbg-10.0 - Managed debug symbols for the .NET 10.0 Software Development Kit<br />

This package contains the managed symbol (pdb) files useful to debug the .NET<br /> Software Development Kit (SDK) itself.

Change Log:

dotnet-sdk-10.0 - .NET 10.0 Software Development Kit<br />

The .NET SDK is a collection of command line applications to<br /> create, build, publish and run .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-runtime-dbg-10.0 - Managed debug symbols NET 10.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the .NET runtime itself.

Change Log:

dotnet-runtime-10.0 - NET 10.0 runtime<br />

The .NET runtime contains everything needed to run .NET applications.<br /> It includes a high performance Virtual Machine as well as the framework<br /> libraries used by .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-hostfxr-10.0 - .NET command line host resolver<br />

The .NET host resolver contains the logic to resolve and select<br /> the right version of the .NET SDK or runtime to use.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-host - .NET command line launcher<br />

The .NET host is a command line program that runs a standalone<br /> .NET application or launches the SDK.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-apphost-pack-10.0 - Targeting Pack for Microsoft.NETCore.App 10.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 10.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 10.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-targeting-pack-10.0 - Targeting Pack for Microsoft.AspNetCore.App 10.0<br />

This package provides a targeting pack for Microsoft.AspNetCore.App 10.0<br /> that allows developers to compile against and target Microsoft.AspNetCore.App 10.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-runtime-dbg-10.0 - Managed debug symbols for the ASP.NET Core 10.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the ASP.NET Core runtime itself.

Change Log:

aspnetcore-runtime-10.0 - ASP.NET Core 10.0 runtime<br />

The ASP.NET Core runtime contains everything needed to run .NET<br /> web applications. It includes a high performance Virtual Machine as<br /> well as the framework libraries used by .NET applications.<br /> <br /> ASP.NET Core is a fast, lightweight and modular platform for creating<br /> cross platform web applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-templates-9.0 - .NET 9.0 templates<br />

This package contains templates used by the .NET SDK.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-targeting-pack-9.0 - Targeting Pack for Microsoft.NETCore.App 9.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 9.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 9.0<br /> applications using the .NET SDK.

Change Log:

dotnet-sdk-dbg-9.0 - Managed debug symbols for the .NET 9.0 Software Development Kit<br />

This package contains the managed symbol (pdb) files useful to debug the .NET<br /> Software Development Kit (SDK) itself.

Change Log:

dotnet-sdk-9.0 - .NET 9.0 Software Development Kit<br />

The .NET SDK is a collection of command line applications to<br /> create, build, publish and run .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-runtime-dbg-9.0 - Managed debug symbols NET 9.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the .NET runtime itself.

Change Log:

dotnet-runtime-9.0 - NET 9.0 runtime<br />

The .NET runtime contains everything needed to run .NET applications.<br /> It includes a high performance Virtual Machine as well as the framework<br /> libraries used by .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-hostfxr-9.0 - .NET command line host resolver<br />

The .NET host resolver contains the logic to resolve and select<br /> the right version of the .NET SDK or runtime to use.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-apphost-pack-9.0 - Targeting Pack for Microsoft.NETCore.App 9.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 9.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 9.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-targeting-pack-9.0 - Targeting Pack for Microsoft.AspNetCore.App 9.0<br />

This package provides a targeting pack for Microsoft.AspNetCore.App 9.0<br /> that allows developers to compile against and target Microsoft.AspNetCore.App 9.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-runtime-dbg-9.0 - Managed debug symbols for the ASP.NET Core 9.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the ASP.NET Core runtime itself.

Change Log:

aspnetcore-runtime-9.0 - ASP.NET Core 9.0 runtime<br />

The ASP.NET Core runtime contains everything needed to run .NET<br /> web applications. It includes a high performance Virtual Machine as<br /> well as the framework libraries used by .NET applications.<br /> <br /> ASP.NET Core is a fast, lightweight and modular platform for creating<br /> cross platform web applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

netstandard-targeting-pack-2.1 - Targeting Pack for NETStandard.Library 2.1<br />

This package provides a targeting pack for NETStandard.Library 2.1<br /> that allows developers to compile against and target NETStandard.Library 2.1<br /> applications using the .NET SDK.

Change Log:

gstreamer1-plugins-bad-free-libs - Runtime libraries for the GStreamer media framework "bad" plug-ins<br />

GStreamer is a streaming media framework, based on graphs of elements which<br /> operate on media data.<br /> <br /> This package contains the runtime libraries for plugins that<br /> aren't tested well enough, or the code is not of good enough quality.

Change Log:

gstreamer1-plugins-bad-free - GStreamer streaming media framework "bad" plugins<br />

GStreamer is a streaming media framework, based on graphs of elements which<br /> operate on media data.<br /> <br /> This package contains plug-ins that aren't tested well enough, or the code<br /> is not of good enough quality.

Change Log:

unbound-libs - Libraries used by the unbound server and client applications<br />

Contains libraries used by the unbound server and client applications

Change Log:

unbound-dracut - Unbound dracut module<br />

Unbound dracut module allowing use of Unbound for name resolution<br /> in initramfs.

Change Log:

unbound - Validating, recursive, and caching DNS(SEC) resolver<br />

Unbound is a validating, recursive, and caching DNS(SEC) resolver.<br /> <br /> The C implementation of Unbound is developed and maintained by NLnet<br /> Labs. It is based on ideas and algorithms taken from a java prototype<br /> developed by Verisign labs, Nominet, Kirei and ep.net.<br /> <br /> Unbound is designed as a set of modular components, so that also<br /> DNSSEC (secure DNS) validation and stub-resolvers (that do not run<br /> as a server, but are linked into an application) are easily possible.

Change Log:

python3-unbound - Python 3 modules and extensions for unbound<br />

Python 3 modules and extensions for unbound

Change Log:

perl-PCP-PMDA - Performance Co-Pilot (PCP) Perl bindings and documentation<br />

The PCP::PMDA Perl module contains the language bindings for<br /> building Performance Metric Domain Agents (PMDAs) using Perl.<br /> Each PMDA exports performance data for one specific domain, for<br /> example the operating system kernel, Cisco routers, a database,<br /> an application, etc.

Change Log:

perl-PCP-MMV - Performance Co-Pilot (PCP) Perl bindings for PCP Memory Mapped Values<br />

The PCP::MMV module contains the Perl language bindings for<br /> building scripts instrumented with the Performance Co-Pilot<br /> (PCP) Memory Mapped Value (MMV) mechanism.<br /> This mechanism allows arbitrary values to be exported from an<br /> instrumented script into the PCP infrastructure for monitoring<br /> and analysis with pmchart, pmie, pmlogger and other PCP tools.

Change Log:

perl-PCP-LogSummary - Performance Co-Pilot (PCP) Perl bindings for post-processing output of pmlogsummary<br />

The PCP::LogSummary module provides a Perl module for using the<br /> statistical summary data produced by the Performance Co-Pilot<br /> pmlogsummary utility. This utility produces various averages,<br /> minima, maxima, and other calculations based on the performance<br /> data stored in a PCP archive. The Perl interface is ideal for<br /> exporting this data into third-party tools (e.g. spreadsheets).

Change Log:

perl-PCP-LogImport - Performance Co-Pilot (PCP) Perl bindings for importing external data into PCP archives<br />

The PCP::LogImport module contains the Perl language bindings for<br /> importing data in various 3rd party formats into PCP archives so<br /> they can be replayed with standard PCP monitoring tools.

Change Log:

pcp-pmda-libvirt - Performance Co-Pilot (PCP) metrics from virtual machines<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting virtualisation statistics from libvirt about behaviour of guest<br /> and hypervisor machines.

Change Log:

pcp-zeroconf - Performance Co-Pilot (PCP) Zeroconf Package<br />

This package contains configuration tweaks and files to increase metrics<br /> gathering frequency, several extended pmlogger configurations, as well as<br /> automated pmie diagnosis, alerting and self-healing for the localhost.

Change Log:

pcp-testsuite - Performance Co-Pilot (PCP) test suite<br />

Quality assurance test suite for Performance Co-Pilot (PCP).

Change Log:

pcp-system-tools - Performance Co-Pilot (PCP) System and Monitoring Tools<br />

This PCP module contains additional system monitoring tools written<br /> in the Python language.

Change Log:

pcp-selinux - Selinux policy package<br />

This package contains SELinux support for PCP. The package contains<br /> interface rules, type enforcement and file context adjustments for an<br /> updated policy package.

Change Log:

pcp-pmda-zswap - Performance Co-Pilot (PCP) metrics for compressed swap<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about compressed swap.

Change Log:

pcp-pmda-zimbra - Performance Co-Pilot (PCP) metrics for Zimbra<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Zimbra.

Change Log:

pcp-pmda-weblog - Performance Co-Pilot (PCP) metrics from web server logs<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about web server logs.

Change Log:

pcp-pmda-uwsgi - Performance Co-Pilot (PCP) metrics from uWSGI servers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from uWSGI servers.

Change Log:

pcp-pmda-unbound - Performance Co-Pilot (PCP) metrics for the Unbound DNS Resolver<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Unbound DNS Resolver.

Change Log:

pcp-pmda-trace - Performance Co-Pilot (PCP) metrics for application tracing<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about trace performance data in applications.

Change Log:

pcp-pmda-systemd - Performance Co-Pilot (PCP) metrics from the Systemd journal<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from the Systemd journal.

Change Log:

pcp-pmda-summary - Performance Co-Pilot (PCP) summary metrics from pmie<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about other installed PMDAs.

Change Log:

pcp-pmda-statsd - Performance Co-Pilot (PCP) metrics from statsd<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting statistics from the statsd daemon.

Change Log:

pcp-pmda-sockets - Performance Co-Pilot (PCP) per-socket metrics<br />

This package contains the PCP Performance Metric Domain Agent (PMDA) for<br /> collecting per-socket statistics, making use of utilities such as 'ss'.

Change Log:

pcp-pmda-snmp - Performance Co-Pilot (PCP) metrics for Simple Network Management Protocol<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about SNMP.

Change Log:

pcp-pmda-smart - Performance Co-Pilot (PCP) metrics for S.M.A.R.T values<br />

This package contains the PCP Performance Metric Domain Agent (PMDA) for<br /> collecting metrics of disk S.M.A.R.T values making use of data from the<br /> smartmontools package.

Change Log:

pcp-pmda-slurm - Performance Co-Pilot (PCP) metrics for the SLURM Workload Manager<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from the SLURM Workload Manager.

Change Log:

pcp-pmda-shping - Performance Co-Pilot (PCP) metrics for shell command responses<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about quality of service and response time measurements of<br /> arbitrary shell commands.

Change Log:

pcp-pmda-sendmail - Performance Co-Pilot (PCP) metrics for Sendmail<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Sendmail traffic.

Change Log:

pcp-pmda-samba - Performance Co-Pilot (PCP) metrics for Samba<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Samba.

Change Log:

pcp-pmda-rsyslog - Performance Co-Pilot (PCP) metrics for Rsyslog<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Rsyslog.

Change Log:

pcp-pmda-roomtemp - Performance Co-Pilot (PCP) metrics for the room temperature<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the room temperature.

Change Log:

pcp-pmda-redis - Performance Co-Pilot (PCP) metrics for Redis<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from Redis servers (redis.io).

Change Log:

pcp-pmda-rabbitmq - Performance Co-Pilot (PCP) metrics for RabbitMQ queues<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about RabbitMQ message queues.

Change Log:

pcp-pmda-postgresql - Performance Co-Pilot (PCP) metrics for PostgreSQL<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the PostgreSQL database.

Change Log:

pcp-pmda-postfix - Performance Co-Pilot (PCP) metrics for the Postfix (MTA)<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Postfix (MTA).

Change Log:

pcp-pmda-podman - Performance Co-Pilot (PCP) metrics for podman containers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting podman container and pod statistics via the podman REST API.

Change Log:

pcp-pmda-pdns - Performance Co-Pilot (PCP) metrics for PowerDNS<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the PowerDNS.

Change Log:

pcp-pmda-oracle - Performance Co-Pilot (PCP) metrics for the Oracle database<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Oracle database.

Change Log:

pcp-pmda-openvswitch - Performance Co-Pilot (PCP) metrics for Open vSwitch<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from Open vSwitch.

Change Log:

pcp-pmda-openmetrics - Performance Co-Pilot (PCP) metrics from OpenMetrics endpoints<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting metrics from OpenMetrics (https://openmetrics.io/) endpoints.

Change Log:

pcp-pmda-nvidia-gpu - Performance Co-Pilot (PCP) metrics for the Nvidia GPU<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Nvidia GPUs.

Change Log:

pcp-pmda-nginx - Performance Co-Pilot (PCP) metrics for the Nginx Webserver<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Nginx Webserver.

Change Log:

pcp-pmda-nfsclient - Performance Co-Pilot (PCP) metrics for NFS Clients<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics for NFS Clients.

Change Log:

pcp-pmda-news - Performance Co-Pilot (PCP) metrics for Usenet News<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Usenet News.

Change Log:

pcp-pmda-netfilter - Performance Co-Pilot (PCP) metrics for Netfilter framework<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Netfilter packet filtering framework.

Change Log:

pcp-pmda-netcheck - Performance Co-Pilot (PCP) metrics for simple network checks<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from simple network checks.

Change Log:

pcp-pmda-named - Performance Co-Pilot (PCP) metrics for Named<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Named nameserver.

Change Log:

pcp-pmda-mysql - Performance Co-Pilot (PCP) metrics for MySQL<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the MySQL database.

Change Log:

pcp-pmda-mounts - Performance Co-Pilot (PCP) metrics for filesystem mounts<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about filesystem mounts.

Change Log:

pcp-pmda-mongodb - Performance Co-Pilot (PCP) metrics for MongoDB<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from MongoDB.

Change Log:

pcp-pmda-mic - Performance Co-Pilot (PCP) metrics for Intel MIC cards<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Intel MIC cards.

Change Log:

pcp-pmda-memcache - Performance Co-Pilot (PCP) metrics for Memcached<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Memcached.

Change Log:

pcp-pmda-mailq - Performance Co-Pilot (PCP) metrics for the sendmail queue<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about email queues managed by sendmail.

Change Log:

pcp-pmda-lustrecomm - Performance Co-Pilot (PCP) metrics for the Lustre Filesytem Comms<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Lustre Filesystem Comms.

Change Log:

pcp-pmda-lustre - Performance Co-Pilot (PCP) metrics for the Lustre Filesytem<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Lustre Filesystem.

Change Log:

pcp-pmda-logger - Performance Co-Pilot (PCP) metrics from arbitrary log files<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from a specified set of log files (or pipes). The PMDA<br /> supports both sampled and event-style metrics.

Change Log:

pcp-pmda-lmsensors - Performance Co-Pilot (PCP) metrics for hardware sensors<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Linux hardware monitoring sensors.

Change Log:

pcp-pmda-lio - Performance Co-Pilot (PCP) metrics for the LIO subsystem<br />

This package provides a PMDA to gather performance metrics from the kernels<br /> iSCSI target interface (LIO). The metrics are stored by LIO within the Linux<br /> kernels configfs filesystem. The PMDA provides per LUN level stats, and a<br /> summary instance per iSCSI target, which aggregates all LUN metrics within the<br /> target.

Change Log:

pcp-pmda-json - Performance Co-Pilot (PCP) metrics for JSON data<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics output in JSON.

Change Log:

pcp-pmda-haproxy - Performance Co-Pilot (PCP) metrics for HAProxy<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting performance metrics from HAProxy over the HAProxy stats socket.

Change Log:

pcp-pmda-hacluster - Performance Co-Pilot (PCP) metrics for High Availability Clusters<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about linux High Availability (HA) Clusters.

Change Log:

pcp-pmda-gpsd - Performance Co-Pilot (PCP) metrics for a GPS Daemon<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about a GPS Daemon.

Change Log:

pcp-pmda-gpfs - Performance Co-Pilot (PCP) metrics for GPFS Filesystem<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the GPFS filesystem.

Change Log:

pcp-pmda-gluster - Performance Co-Pilot (PCP) metrics for the Gluster filesystem<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the gluster filesystem.

Change Log:

pcp-pmda-gfs2 - Performance Co-Pilot (PCP) metrics for the GFS2 filesystem<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Global Filesystem v2.

Change Log:

pcp-pmda-farm - Performance Co-Pilot (PCP) metrics for Seagate FARM Log metrics<br />

This package contains the PCP Performance Metric Domain Agent (PMDA) for<br /> collecting metrics from Seagate Hard Drive vendor specific Field Accessible<br /> Reliability Metrics (FARM) Log making use of data from the smartmontools<br /> package.

Change Log:

pcp-pmda-elasticsearch - Performance Co-Pilot (PCP) metrics for Elasticsearch<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Elasticsearch.

Change Log:

pcp-pmda-ds389log - Performance Co-Pilot (PCP) metrics for 389 Directory Server Loggers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from a 389 Directory Server log.

Change Log:

pcp-pmda-ds389 - Performance Co-Pilot (PCP) metrics for 389 Directory Servers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about a 389 Directory Server.

Change Log:

pcp-pmda-docker - Performance Co-Pilot (PCP) metrics from the Docker daemon<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics using the Docker daemon REST API.

Change Log:

pcp-pmda-dm - Performance Co-Pilot (PCP) metrics for the Device Mapper Cache and Thin Client<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Device Mapper Cache and Thin Client.

Change Log:

pcp-pmda-denki - Performance Co-Pilot (PCP) metrics dealing with electrical power<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics related to the electrical power consumed by and inside<br /> the system.

Change Log:

pcp-pmda-dbping - Performance Co-Pilot (PCP) metrics for Database response times and Availablility<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Database response times and Availablility.

Change Log:

pcp-pmda-cisco - Performance Co-Pilot (PCP) metrics for Cisco routers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about Cisco routers.

Change Log:

pcp-pmda-bonding - Performance Co-Pilot (PCP) metrics for Bonded network interfaces<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about bonded network interfaces.

Change Log:

pcp-pmda-cifs - Performance Co-Pilot (PCP) metrics for the CIFS protocol<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Common Internet Filesytem.

Change Log:

pcp-pmda-bpftrace - Performance Co-Pilot (PCP) metrics from bpftrace scripts<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting performance metrics from bpftrace scripts.

Change Log:

pcp-pmda-bpf - Performance Co-Pilot (PCP) metrics from eBPF ELF modules<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting performance metrics from eBPF ELF modules.

Change Log:

pcp-pmda-bind2 - Performance Co-Pilot (PCP) metrics for BIND servers<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics from BIND (Berkeley Internet Name Domain).

Change Log:

pcp-pmda-bcc - Performance Co-Pilot (PCP) metrics from eBPF/BCC modules<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting performance metrics from eBPF/BCC Python modules.

Change Log:

pcp-pmda-bash - Performance Co-Pilot (PCP) metrics for the Bash shell<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Bash shell.

Change Log:

pcp-pmda-apache - Performance Co-Pilot (PCP) metrics for the Apache webserver<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the Apache webserver.

Change Log:

pcp-pmda-amdgpu - Performance Co-Pilot (PCP) metrics from AMD GPU devices<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> extracting performance metrics from AMDGPU devices.

Change Log:

pcp-pmda-activemq - Performance Co-Pilot (PCP) metrics for ActiveMQ<br />

This package contains the PCP Performance Metrics Domain Agent (PMDA) for<br /> collecting metrics about the ActiveMQ message broker.

Change Log:

pcp-libs-devel - Performance Co-Pilot (PCP) development headers<br />

Performance Co-Pilot (PCP) headers for development.

Change Log:

pcp-libs - Performance Co-Pilot run-time libraries<br />

Performance Co-Pilot (PCP) run-time libraries

Change Log:

pcp-import-sar2pcp - Performance Co-Pilot tools for importing sar data into PCP archive logs<br />

Performance Co-Pilot (PCP) front-end tools for importing sar data<br /> into standard PCP archive logs for replay with any PCP monitoring tool.

Change Log:

pcp-import-mrtg2pcp - Performance Co-Pilot tools for importing MTRG data into PCP archive logs<br />

Performance Co-Pilot (PCP) front-end tools for importing MTRG data<br /> into standard PCP archive logs for replay with any PCP monitoring tool.

Change Log:

pcp-import-iostat2pcp - Performance Co-Pilot tools for importing iostat data into PCP archive logs<br />

Performance Co-Pilot (PCP) front-end tools for importing iostat data<br /> into standard PCP archive logs for replay with any PCP monitoring tool.

Change Log:

pcp-import-ganglia2pcp - Performance Co-Pilot tools for importing ganglia data into PCP archive logs<br />

Performance Co-Pilot (PCP) front-end tools for importing ganglia data<br /> into standard PCP archive logs for replay with any PCP monitoring tool.

Change Log:

pcp-import-collectl2pcp - Performance Co-Pilot tools for importing collectl log files into PCP archive logs<br />

Performance Co-Pilot (PCP) front-end tools for importing collectl data<br /> into standard PCP archive logs for replay with any PCP monitoring tool.

Change Log:

pcp-gui - Visualization tools for the Performance Co-Pilot toolkit<br />

Visualization tools for the Performance Co-Pilot toolkit.<br /> The pcp-gui package primarily includes visualization tools for<br /> monitoring systems using live and archived Performance Co-Pilot<br /> (PCP) sources.

Change Log:

pcp-geolocate - Performance Co-Pilot geographical location metric labels<br />

Performance Co-Pilot (PCP) tools that automatically apply metric labels<br /> containing latitude and longitude, based on IP-address-based lookups.<br /> Used with live maps to show metric values from different locations.

Change Log:

pcp-export-zabbix-agent - Module for exporting PCP metrics to Zabbix agent<br />

Performance Co-Pilot (PCP) module for exporting metrics from PCP to<br /> Zabbix via the Zabbix agent - see zbxpcp(3) for further details.

Change Log:

pcp-export-pcp2zabbix - Performance Co-Pilot tools for exporting PCP metrics to Zabbix<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> to the Zabbix (https://www.zabbix.org/) monitoring software.

Change Log:

pcp-export-pcp2xml - Performance Co-Pilot tools for exporting PCP metrics in XML format<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> in XML format.

Change Log:

pcp-export-pcp2spark - Performance Co-Pilot tools for exporting PCP metrics to Apache Spark<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> in JSON format to Apache Spark. See https://spark.apache.org/ for<br /> further details on Apache Spark.

Change Log:

pcp-export-pcp2openmetrics - Performance Co-Pilot tools for exporting PCP metrics in OpenMetrics format<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> in OpenMetrics (https://openmetrics.io/) format.

Change Log:

pcp-export-pcp2json - Performance Co-Pilot tools for exporting PCP metrics in JSON format<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> in JSON format.

Change Log:

pcp-export-pcp2influxdb - Performance Co-Pilot tools for exporting PCP metrics to InfluxDB<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> to InfluxDB (https://influxdata.com/time-series-platform/influxdb).

Change Log:

pcp-export-pcp2graphite - Performance Co-Pilot tools for exporting PCP metrics to Graphite<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> to graphite (http://graphite.readthedocs.org).

Change Log:

pcp-export-pcp2elasticsearch - Performance Co-Pilot tools for exporting PCP metrics to ElasticSearch<br />

Performance Co-Pilot (PCP) front-end tools for exporting metric values<br /> to Elasticsearch - a distributed, RESTful search and analytics engine.<br /> See https://www.elastic.co/community for further details.

Change Log:

pcp-devel - Performance Co-Pilot (PCP) development tools and documentation<br />

Performance Co-Pilot (PCP) documentation and tools for development.

Change Log:

pcp-conf - Performance Co-Pilot run-time configuration<br />

Performance Co-Pilot (PCP) run-time configuration

Change Log:

pcp - System-level performance monitoring and performance management<br />

Performance Co-Pilot (PCP) provides a framework and services to support<br /> system-level performance monitoring and performance management.<br /> <br /> The PCP open source release provides a unifying abstraction for all of<br /> the interesting performance data in a system, and allows client<br /> applications to easily retrieve and process any subset of that data.

Change Log:

python3-pcp - Performance Co-Pilot (PCP) Python3 bindings and documentation<br />

This python PCP module contains the language bindings for<br /> Performance Metric API (PMAPI) monitor tools and Performance<br /> Metric Domain Agent (PMDA) collector tools written in Python3.

Change Log:

pcp-doc - Documentation and tutorial for the Performance Co-Pilot<br />

Documentation and tutorial for the Performance Co-Pilot<br /> Performance Co-Pilot (PCP) provides a framework and services to support<br /> system-level performance monitoring and performance management.<br /> <br /> The pcp-doc package provides useful information on using and<br /> configuring the Performance Co-Pilot (PCP) toolkit for system<br /> level performance management. It includes tutorials, HOWTOs,<br /> and other detailed documentation about the internals of core<br /> PCP utilities and daemons, and the PCP graphical tools.

Change Log:

haproxy - HAProxy reverse proxy for high availability environments<br />

HAProxy is a TCP/HTTP reverse proxy which is particularly suited for high<br /> availability environments. Indeed, it can:<br /> - route HTTP requests depending on statically assigned cookies<br /> - spread load among several servers while assuring server persistence<br /> through the use of HTTP cookies<br /> - switch to backup servers in the event a main one fails<br /> - accept connections to special ports dedicated to service monitoring<br /> - stop accepting connections without breaking existing ones<br /> - add, modify, and delete HTTP headers in both directions<br /> - block requests matching particular patterns<br /> - report detailed status to authenticated users from a URI<br /> intercepted from the application

Change Log:

libcurl-devel - Files needed for building applications with libcurl<br />

The libcurl-devel package includes header files and libraries necessary for<br /> developing programs which use the libcurl library. It contains the API<br /> documentation of the library, too.

Change Log:

bind9.18-utils - Utilities for querying DNS name servers<br />

Bind-utils contains a collection of utilities for querying DNS (Domain<br /> Name System) name servers to find out information about Internet<br /> hosts. These tools will provide you with the IP addresses for given<br /> host names, as well as other information about registered domains and<br /> network addresses.<br /> <br /> You should install bind9.18-utils if you need to get information from DNS name<br /> servers.

Change Log:

bind9.18-libs - Libraries used by the BIND DNS packages<br />

Contains heavyweight version of BIND suite libraries used by both named DNS<br /> server and utilities in bind9.18-utils package.

Change Log:

bind9.18-dnssec-utils - DNSSEC keys and zones management utilities<br />

bind9.18-dnssec-utils contains a collection of utilities for editing<br /> DNSSEC keys and BIND zone files. These tools provide generation,<br /> revocation and verification of keys and DNSSEC signatures in zone files.<br /> <br /> You should install bind9.18-dnssec-utils if you need to sign a DNS zone<br /> or maintain keys for it.

Change Log:

bind9.18-chroot - A chroot runtime environment for the ISC BIND DNS server, named(8)<br />

This package contains a tree of files which can be used as a<br /> chroot(2) jail for the named(8) program from the BIND package.<br /> Based on the code from Jan "Yenya" Kasprzak <kas@fi.muni.cz>

Change Log:

bind9.18 - The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server<br />

BIND (Berkeley Internet Name Domain) is an implementation of the DNS<br /> (Domain Name System) protocols. BIND includes a DNS server (named),<br /> which resolves host names to IP addresses; a resolver library<br /> (routines for applications to use when interfacing with DNS); and<br /> tools for verifying that the DNS server is operating properly.

Change Log:

libXfont2 - X.Org X11 libXfont2 runtime library<br />

X.Org X11 libXfont2 runtime library

Change Log:

dotnet-templates-8.0 - .NET 8.0 templates<br />

This package contains templates used by the .NET SDK.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-targeting-pack-8.0 - Targeting Pack for Microsoft.NETCore.App 8.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 8.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 8.0<br /> applications using the .NET SDK.

Change Log:

dotnet-sdk-dbg-8.0 - Managed debug symbols for the .NET 8.0 Software Development Kit<br />

This package contains the managed symbol (pdb) files useful to debug the .NET<br /> Software Development Kit (SDK) itself.

Change Log:

dotnet-sdk-8.0 - .NET 8.0 Software Development Kit<br />

The .NET SDK is a collection of command line applications to<br /> create, build, publish and run .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-runtime-dbg-8.0 - Managed debug symbols NET 8.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the .NET runtime itself.

Change Log:

dotnet-runtime-8.0 - NET 8.0 runtime<br />

The .NET runtime contains everything needed to run .NET applications.<br /> It includes a high performance Virtual Machine as well as the framework<br /> libraries used by .NET applications.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-hostfxr-8.0 - .NET command line host resolver<br />

The .NET host resolver contains the logic to resolve and select<br /> the right version of the .NET SDK or runtime to use.<br /> <br /> .NET is a fast, lightweight and modular platform for creating<br /> cross platform applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dotnet-apphost-pack-8.0 - Targeting Pack for Microsoft.NETCore.App 8.0<br />

This package provides a targeting pack for Microsoft.NETCore.App 8.0<br /> that allows developers to compile against and target Microsoft.NETCore.App 8.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-targeting-pack-8.0 - Targeting Pack for Microsoft.AspNetCore.App 8.0<br />

This package provides a targeting pack for Microsoft.AspNetCore.App 8.0<br /> that allows developers to compile against and target Microsoft.AspNetCore.App 8.0<br /> applications using the .NET SDK.

Change Log:

aspnetcore-runtime-dbg-8.0 - Managed debug symbols for the ASP.NET Core 8.0 runtime<br />

This package contains the managed symbol (pdb) files useful to debug the<br /> managed parts of the ASP.NET Core runtime itself.

Change Log:

aspnetcore-runtime-8.0 - ASP.NET Core 8.0 runtime<br />

The ASP.NET Core runtime contains everything needed to run .NET<br /> web applications. It includes a high performance Virtual Machine as<br /> well as the framework libraries used by .NET applications.<br /> <br /> ASP.NET Core is a fast, lightweight and modular platform for creating<br /> cross platform web applications that work on Linux, Mac and Windows.<br /> <br /> It particularly focuses on creating console applications, web<br /> applications and micro-services.

Change Log:

dracut-live - dracut modules to build a dracut initramfs with live image capabilities<br />

This package requires everything which is needed to build an<br /> initramfs with dracut, with live image capabilities, like Live CDs.

Change Log:

dracut-caps - dracut modules to build a dracut initramfs which drops capabilities<br />

This package requires everything which is needed to build an<br /> initramfs with dracut, which drops capabilities.

Change Log:

bind-utils - Utilities for querying DNS name servers<br />

Bind-utils contains a collection of utilities for querying DNS (Domain<br /> Name System) name servers to find out information about Internet<br /> hosts. These tools will provide you with the IP addresses for given<br /> host names, as well as other information about registered domains and<br /> network addresses.<br /> <br /> You should install bind-utils if you need to get information from DNS name<br /> servers.

Change Log:

bind-libs - Libraries used by the BIND DNS packages<br />

Contains heavyweight version of BIND suite libraries used by both named DNS<br /> server and utilities in bind-utils package.

Change Log:

bind-dnssec-utils - DNSSEC keys and zones management utilities<br />

Bind-dnssec-utils contains a collection of utilities for editing<br /> DNSSEC keys and BIND zone files. These tools provide generation,<br /> revocation and verification of keys and DNSSEC signatures in zone files.<br /> <br /> You should install bind-dnssec-utils if you need to sign a DNS zone<br /> or maintain keys for it.

Change Log:

bind-chroot - A chroot runtime environment for the ISC BIND DNS server, named(8)<br />

This package contains a tree of files which can be used as a<br /> chroot(2) jail for the named(8) program from the BIND package.<br /> Based on the code from Jan "Yenya" Kasprzak <kas@fi.muni.cz>

Change Log:

bind - The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server<br />

BIND (Berkeley Internet Name Domain) is an implementation of the DNS<br /> (Domain Name System) protocols. BIND includes a DNS server (named),<br /> which resolves host names to IP addresses; a resolver library<br /> (routines for applications to use when interfacing with DNS); and<br /> tools for verifying that the DNS server is operating properly.

Change Log:

bind-license - License of the BIND DNS suite<br />

Contains license of the BIND DNS suite.

Change Log:

bind-dnssec-doc - Manual pages of DNSSEC utilities<br />

Bind-dnssec-doc contains manual pages for bind-dnssec-utils.

Change Log:

python3-bind - A module allowing rndc commands to be sent from Python programs<br />

This package provides a module which allows commands to be sent to rndc directly from Python programs.

Change Log: